Displaying Traffic Accounting; Traffic Accounting Configuration Example - H3C S7500 Series Operation Manual

Operation Manual – Traffic Accounting
H3C S7500 Series Ethernet Switches
Table 1-3 Configure a traffic group for a domain
Configuration
Enter system view
Enter ISP domain view
Set the accounting mode to
traffic accounting
Configure the domain to
use a specified traffic group
Note:
The interface card that connects an external network (the Internet) should be
configured as a traffic collection card.
Currently, only single rate is supported, and multi-rate is not supported.

1.3 Displaying Traffic Accounting

After the above configuration, you can execute the display command in any view to
display the operation status of traffic accounting and verify your configuration.
Table 1-4 Display traffic accounting
Display traffic group
information
Display traffic accounting
configuration
Display traffic statistics of
one or all online users

1.4 Traffic Accounting Configuration Example

I. Network requirements
A user running a 802.1x authentication client accesses the Internet through a
switch. The user can access external networks after passing the authentication.
The accounting mode is traffic accounting. When the user accesses the networks
11.127.1.0/24 and 12.127.1.0/24, the accounting server CAMS charges the user
for the user's online traffic. When the user accesses other network segments,
however, the user is not charged.
system-view
domain domain-name
accounting-mode traffic
traffic-group group-name rate
idnum
To do...
display traffic-accounting
traffic-group [ group-name ]
display traffic-accounting
accounting-slot [ slot-num ]
display traffic-accounting
statistics [ ip-address ]
Chapter 1 Traffic Accounting Configuration
Use the command...
Use the command...
1-4
Remarks
—
—
Required
Required
Remarks
You can execute
the display
command in any
view.