Pim-Sm Configuration Example - H3C S7500 Series Operation Manual

Hide thumbs Also See for S7500 Series:

Table of Contents

Operation Manual – Multicast

H3C S7500 Series Ethernet Switches

[H3C-Vlan-interface10] quit

[H3C] interface Vlan-interface 11

[H3C-Vlan-interface11] ip address 2.2.2.2 255.255.0.0

[H3C-Vlan-interface11] pim dm

[H3C-Vlan-interface11] quit

[H3C] interface Vlan-interface 12

[H3C-Vlan-interface12] ip address 3.3.3.3 255.255.0.0

[H3C-Vlan-interface12] pim dm

7.6.2 PIM-SM Configuration Example

I. Network requirements

All Ethernet switches are reachable for each other in the practical network.

LS_A is connected to LS_B through VLAN-interface 10, to Host A through

VLAN-interface 11 and to LS_C through VLAN-interface 12.

LS_B is connected to LS_A through VLAN-interface 10, to LS_C through

VLAN-interface 11 and to LS_D through VLAN-interface 12.

LS_C is connected to Host B through VLAN-interface 10, to LS_B through

VLAN-interface 11 and to LS_A through VLAN-interface 12.

Host A is the receiver of the multicast group whose multicast IP address is 225.0.0.1.

Host B begins to send data to the destination 225.0.0.1 and LS_A receives the

multicast data from Host B through LS_B.

II. Network diagram

Figure 7-8 Network diagram for PIM-SM configuration

Chapter 7 PIM Configuration

Table of Contents