Operation Manual – Hardware-Dependent Software Configuration
H3C S7500 Series Ethernet Switches
1.4.2 Switch Chip Auto-reset Configuration
Follow these steps to configure switch chip auto-reset:
Enter system view
Enable the function of
monitoring internal
channels
Enable switch chip
auto-reset
Disable switch chip
auto-reset
To do...
system-view
monitor inner-channel
monitor slot slot-id
enable
monitor slot slot-id
disable
Use the command...
1-5
Chapter 1 Hardware-Dependent
Software Configuration
Remarks
—
Required
Required
By default, switch chips
cannot be reset
automatically when the
internal channel
handshake fails
Optional