Clearing Multicast Related Entries - H3C S7500 Series Operation Manual

Operation Manual – Multicast
H3C S7500 Series Ethernet Switches
Enter system view
Enter Ethernet port view
Configure static router
ports
Exit port view
Enter VLAN view
Configure static router
ports
Caution:
You can configure static router ports in Ethernet port view or VLAN view, but you can
view the related configuration information in Ethernet port view only.
III. Configuration example
# Configure Ethernet2/0/1 in VLAN 2 as a static router port.
<H3C> system-view
[H3C] interface Ethernet 2/0/1
[H3C-Ethernet2/0/1] multicast static-router-port vlan 2

4.2.5 Clearing Multicast Related Entries

Use the reset command in user view to clear the related statistics information about the
common multicast configuration.
Follow these steps to clear multicast related entries:
Clear the forwarding
entries in the multicast
forwarding cache (MFC)
or the statistics
information about the
forwarding entries in the
MFC
To do...
system-view
interface interface-type
interface-number
multicast static-router-port vlan
vlan-id
quit
vlan vlan-id
multicast static-router-port
interface interface-type
interface-number
To do...
reset multicast
forwarding-table [ statistics ]
{ all | { group-address [ mask
{ group-mask |
group-mask-length } ] |
source-address [ mask
{ source-mask |
source-mask-length } ] |
incoming-interface
interface-type interface-number }
* }
Chapter 4 Common Multicast Configuration
Use the command...
Use the command...
4-5
Remarks
—
—
Required
—
—
Required
Remarks
Clear the related
forwarding entries
in the MFC