H3C S7500 Series Operation Manual page 44

Operation Manual – Login
H3C S7500 Series Ethernet Switches
RS-232
PC
Figure 2-1 Diagram for setting the connection to the console port
2) If you use a PC to connect to the console port, launch a terminal emulation
program (such as Terminal in Windows 3.X or HyperTerminal in Windows 9X),
choose the serial port to be connected to the switch and perform the configuration
shown in
the parameters of a terminal are configured as those listed in
type of the terminal is set to VT100.
Figure 2-2 Create a connection
Figure 2-3 Specify the port used to establish the connection
C onsole port
Configuration cable
Figure 2-2 through Figure 2-4
2-2
Chapter 2 Logging in through the Console Port
Switch
for the connection to be created. Normally,
Table 2-1. And the