Configuring Interaction For The Cluster - H3C S7500 Series Operation Manual

Operation Manual – Cluster
H3C S7500 Series Ethernet Switches
II. Building a cluster automatically
Follow these steps to enable the cluster function automatically:
Enter system view
Enter VLAN interface view
Configure the IP address
of the VLAN interface
Enter cluster view
Configure the rang e of
the IP addresses of the
cluster
Build a cluster
automatically
Note:
After a cluster is built automatically, ACL 3998 and ACL 3999 will be generated
automatically.
After a cluster is built automatically, ACL 3998 and ACL 3999 can neither be
configured/modified nor removed.

1.2.8 Configuring Interaction for the Cluster

Follow these steps to configure interaction for the cluster:
Enter system view
Enter cluster view
Configure the public FTP server for the
cluster
To do...
system-view
interface Vlan-interface
vlan-id
ip address ip-address
{ mask | mask-length }
cluster
ip-pool
administrator-ip-address
{ ip-mask |
ip-mask-length }
auto-build [ recover ]
To do...
Use the command...
Use the command...
system-view
cluster
ftp-server ip-address
1-10
Chapter 1 Cluster
Remarks
—
Required
You are required to
configure the IP address
of the Layer 3 virtual
interface of VLAN 1
before you set up a
cluster. Otherwise, the
cluster cannot be set up.
Required
—
Required
Optional
You can build clusters
according to
corresponding prompts
Remarks
—
Required
Optional