Displaying And Maintaining Vrrp - H3C S7500 Series Operation Manual

Operation Manual – VRRP-HA
H3C S7500 Series Ethernet Switches
Enter VLAN interface view
Configure the priority of
the backup group
Configure the preemptive
mode and delay period for
the backup group
Configure the
authentication type and
authentication key
Configure the VRRP timer
Specify the
interface/Ethernet port to
be tracked

1.3 Displaying and Maintaining VRRP

Display VRRP state
information and statistics
information
Clear VRRP statistics
Enable VRRP debugging
function
To do...
interface Vlan-interface
valn-id
vrrp vrid virtual-router-id
priority priority
vrrp vrid virtual-router-id
preempt-mode [ timer
delay delay-value ]
vrrp
authentication-mode
authentication-type
authentication-key
vrrp vrid virtual-router-id
timer advertise
adver-interval
vrrp vrid virtual-router-id
track interface-type
interface-number
[ reduced value-reduced ]
To do...
display vrrp [ interface
vlan-interface vlan-id |
statistics
[ vlan-interface vlan-id ] ]
[ virtual-router-id ]
reset vrrp statistics
[ vlan-interface vlan-id ]
[ virtual-router-id ]
debugging vrrp { state |
packet }
Use the command...
Use the command...
1-8
Chapter 1 VRRP Configuration
Remarks
—
Optional
By default, the priority of a
backup group is 100.
Optional
By default, a backup
group operates in the
preemptive mode.
Optional
By default, no
authentication is
configured for a backup
group.
Optional
By default, the interval for
the master switch in a
backup group to send
VRRP packets is 1
second.
Optional
value-reduced: Value by
which the priority is to be
reduced. By default, this
value is 10.
Remarks
Available in any view.
Available in user view.
Available in user view.