H3C S7500 Series Operation Manual page 787

Operation Manual – SNMP and RMON
H3C S7500 Series Ethernet Switches
To do...
Enter system view
Enable SNMP agent
Set system
information
Set an SNMP group
Add a new user to
an SNMP group
Set the size of a
SNMP packet that
the agent can
send/receive
Set the device
engine ID
Create or update the
view information
Use the command...
system-view
snmp-agent
snmp-agent sys-info
{ contact sys-contact |
location sys-location |
version { { v1 | v2c | v3 }* |
all } }
snmp-agent group v3
group-name
[ authentication |
privacy ] [ read-view
read-view ] [ write-view
write-view ] [ notify-view
notify-view ] [ acl
acl-number ]
snmp-agent usm-user
v3 user-name
group-name
[ authentication-mode
{ md5 | sha }
auth-password
[ privacy-mode des56
priv-password ] ] [ acl
acl-number ]
snmp-agent packet
max-size byte-count
snmp-agent
local-engineid engineid
snmp-agent mib-view
{ included | excluded }
view-name oid-tree
1-5
Chapter 1 SNMP Configuration
Remarks
—
Required
By default, SNMP agent is
disabled.
You can enable SNMP agent
by executing this command or
any configuration command of
snmp-agent
Optional
By default, the contact
information for system
maintenance is "Hangzhou
H3C Technologies Co., Ltd. ",
the physical location is
"Hangzhou China", and the
SNMP version is SNMPv3.
Required
Required
Optional
By default, it is 2,000 bytes.
Optional
By default, the device engine
ID is "enterprise number +
device information".
Optional
By default, the view name is
ViewDefault and OID is 1.