H3C S7500 Series Operation Manual page 668

Operation Manual – ACL
H3C S7500 Series Ethernet Switches
Table 1-6 Rule information
Parameter
protocol
source
{ sour-addr
sour-wildcard |
any }
destination
{ dest-addr
dest-wildcard |
any }
precedence
precedence
tos tos
dscp dscp
fragment
time-range
time-name
Note:
sour-wildcard and dest-wildcard represent the wildcard masks of the destination subnet
masks, provided in dotted decimal notation. For example, if you want to specify the
subnet mask as 255.255.0.0, you need to input 0.0.255.255. The wildcard mask can be
0, representing the host address.
Type Function
Protocol Type of protocol
type over IP
Specifies the
Source
source address
address
information in the
information
rule
Specifies the
Destination destination
address address
information information in the
rule
Packet
IP priority
precedence
Packet
ToS priority
precedence
Packet
DSCP priority
precedence
Specifies that the
ACL rule is
Fragment
effective for
information
non-initial fragment
packets
Specifies the time
Time range
range in which the
information
ACL rule is active
1-10
Chapter 1 ACL Configuration
Remarks
When expressed in
numerals, the value range is
1 to 255.
When expressed with a
name, the value can be
GRE, ICMP, IGMP, IP, IPinIP,
OSPF, TCP, and UDP.
sour-addr sour-wildcard is
used to specify the source
address of the packet,
expressed in dotted decimal
notation.
any represents all source
addresses.
dest-addr dest-wildcard is
used to specify the
destination address of the
packet, expressed in dotted
decimal notation.
any represents all
destination address.
Value range: 0 to 7
Value range: 0 to 15
Value range: 0 to 63
—
—