Show Summertime; Set Summertime - Enterasys SecureStack C2 Configuration Manual

show summertime

Mode
Switch command, read‐write.
Example
This example shows how to set the system clock to 7:50 a.m:
C2(su)->set time 7:50:00
show summertime
Use this command to display daylight savings time settings.
Syntax
show summertime
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display daylight savings time settings:
C2(su)->show summertime
Summertime is disabled and set to ''
Start : SUN APR 04 02:00:00 2004
End
Offset: 60 minutes (1 hours 0 minutes)
Recurring: yes, starting at 2:00 of the first Sunday of April and ending at 2:00
of the last Sunday of October

set summertime

Use this command to enable or disable the daylight savings time function.
Syntax
set summertime {enable | disable} [zone]
Parameters
enable | disable
zone
Defaults
If a zone name is not specified, none will be applied.
3-16 Basic Configuration
: SUN OCT 31 02:00:00 2004
Enables or disables the daylight savings time function.
(Optional) Applies a name to the daylight savings time settings.