Show Multiauth Idle-Timeout - Enterasys Matrix 2G4072-52 Configuration Manual

Security Configuration Command Set
Configuring Multiple Authentication

14.3.10.11 show multiauth idle-timeout

Use this command to display the multiple authentication timeout value for an idle session. This will
display the idle-timeout vlaues, in seconds, for the following authentication types: dot1x, pwa, mac,
and cep.
show multiauth idle-timeout
Syntax Description
None
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
None
Example
This example shows how to display timeout values for an idle session, for each of the authentication
types:
Matrix(rw)->show multiauth idle-timeout
Authentication type
------------------- -------------
dot1x
pwa
mac
cep
14-146 Matrix DFE-Platinum and Diamond Series Configuration Guide
Timeout (sec)
300
300
300
300