Clear Dhcp Conflict - Enterasys SecureStack C2 Configuration Manual

clear dhcp conflict

Defaults
If no address is specified, conflict information for all addresses is displayed.
Mode
Read‐only.
Example
This example displays conflict information for all addresses. Note that ping is the only detection
method used.
C2(ro)->show dhcp conflict
IP address
-----------
192.0.0.2
192.0.0.3
192.0.0.4
192.0.0.12
clear dhcp conflict
Use this command to clear conflict information for one or all addresses, or to disable conflict
logging.
Syntax
clear dhcp conflict {logging | ip-address| *}
Parameters
logging
ip‐address
*
Defaults
None.
Mode
Switch command, read‐write.
Examples
This example disables DHCP conflict logging.
C2(rw)->clear dhcp conflict logging
This example clears the conflict information for the IP address 192.0.0.2.
C2(rw)->clear dhcp conflict 192.0.0.2
14-6 DHCP Server Configuration
Detection Method
-----------------
Ping
Ping
Ping
Ping
Disables conflict logging.
Clears the conflict information for the specified IP address.
Clears the conflict information for all IP addresses.
Detection Time
---------------
0 days 19h:01m:23s
0 days 19h:00m:46s
0 days 19h:01m:25s
0 days 19h:01m:26s