Clear Lldp Port Tx-Tlv - Enterasys Matrix 2G4072-52 Configuration Manual

3.2.4.25

clear lldp port tx-tlv

Use this command to clear the optional LLDP and LLDP-MED TLVs to be transmitted in
LLDPDUs by the specified port or ports to the default value of disabled.
clear lldp port tx-tlv {[all] | [port-desc] [sys-name] [sys-desc] [sys-cap]
[mgmt-addr] [vlan-id] [stp] [lacp] [gvrp] [mac-phy] [poe] [link-aggr]
[max-frame] [med-cap] [med-pol] [med-loc] [med-poe]} port-string
Syntax Description
all
port-desc
sys-name
sys-desc
sys-cap
mgmt-addr
vlan-id
stp
lacp
gvrp
mac-phy
Disable all optional TLVs from being transmitted in
LLDPDUs.
Disable the Port Description optional basic LLDP TLV
from being transmitted in LLDPDUs.
Disable the System Name optional basic LLDP TLV from
being transmitted in LLDPDUs.
Disable the System Description optional basic LLDP TLV
from being transmitted in LLDPDUs.
Disable the System Capabilities optional basic LLDP
TLV from being transmitted in LLDPDUs.
Disable the Management Address optional basic LLDP
TLV from being transmitted in LLDPDUs.
Disable the Port VLAN ID IEEE 802.1 Extensions TLV
from being transmitted in LLDPDUs.
Disable the Spanning Tree information defined by
Protocol Identity IEEE 802.1 Extensions TLV from being
transmitted in LLDPDUs.
Disable the LACP information defined by Protocol
Identity IEEE 802.1 Extensions TLV from being
transmitted in LLDPDUs.
Disable the GVRP information defined by Protocol
Identity IEEE 802.1 Extensions TLV from being
transmitted in LLDPDUs.
Disable the MAC-PHY Configuration/Status IEEE 802.3
Extensions TLV from being transmitted in LLDPDUs.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
3-63