Pausing, Clearing And Closing The Cli - Enterasys Matrix 2G4072-52 Configuration Manual

2.2.11 Pausing, Clearing and Closing the CLI

Purpose
To clear the CLI screen or to close your CLI session.
Commands
The commands used to clear and close the CLI session are listed below and described in the
associated sections as shown.
•
cls (Section 2.2.11.1)
•
exit | quit (Section 2.2.11.2)
Matrix DFE-Platinum and Diamond Series Configuration Guide
General Configuration Command Set
Pausing, Clearing and Closing the CLI
2-147