Mdt-Data-Delay - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

mdt-data-delay

mdt-data-delay timeout
Syntax
no mdt-data-delay
Command introduced in JUNOSe Release 8.2.0.
Release Information
Configures a timeout before switching to data MDT. The no version returns to the
Description
default.
Options
IP PIM Data MDT Configuration
Mode
1288
mdt-data-delay
timeout Timeout value measured in 0.1 seconds in the range 1-255 seconds;
the default is 30