Selecting The Orientation; Overview - Leica TS01 User Manual

Station input
☞
6.4
6.4.1
Description
Access
☞
46
STn.X
STn.Y
03617_001
Key Description
Value To search for a point.
Coord To open the manual coordinate entry screen.
OK To confirm the entered values and continue in the process.
Description of fields
Field Option
E :, N :, Z : Display only
PointID: Display only
hi: Editable field
If no station was set and an app was started, then the last station is set as
the current station and the current horizontal direction is set as the orienta-
tion.

Selecting the Orientation

Overview

All measurements and coordinate computations are referenced to the orienta-
tion of the set station. The orientation can be entered manually or determined
from points that are either measured or selected from the memory.
Select Select Orientationin the Pre-settings screen and choose:
Angle Orientation to enter a new bearing. Refer to
•
with Angle.
Coordinates Orientation to calculate and set the orientation using
•
existing coordinates. Refer to
If no station was set and an app was started, then the last station is set as
the current station and the current horizontal direction is set as the orienta-
tion.
Directions
X Easting
Y Northing
Z Height
Station coordinates
Stn.X Easting coordinate of sta-
tion
Stn.Y Northing coordinate of sta-
tion
Description
The coordinates of the station.
Station name of a previously saved station
position.
Instrument height
☞
The calculation of coordinates is
based on plane coordinates (X and
Y). Enter the instrument height if
necessary.
6.4.3 Orientation with
Apps - Getting Started
6.4.2 Orientation
Coordinates.