1.2
Select tolerances
step-by-step
Tolerances
Selecting Tolerance Profiles
Step
Description
1.
Start a mining application.
2.
Select Tolerances.
3.
Select Select Tolerances.
4.
Select either a Primary, Secondary or Tertiary tolerance profile to be
applied.
5.
Press Cont to set the selected profile.
6.
Press:
Accept to accept the profile in the tolerances summary screen.
OR
Reject to reject the profile and return to the define tolerance profile
screen.
•
Tolerances themselves can be changed by using the PIN-protected Define
Tolerance application. Refer to "1.1 Defining Tolerances".
•
If a tolerance was uploaded by the Mining Data Manager software, this tolerance
will appear as "Uploaded" and cannot be changed on the instrument.
FlexLine/FlexLine plus, 7