Silicon Laboratories EFR32xG14 Wireless Gecko Reference Manual page 520

Bit Name
8 MSTOP
Write 1 to clear the MSTOP interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
7 NACK
Write 1 to clear the NACK interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
6 ACK
Write 1 to clear the ACK interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags (This
feature must be enabled globally in MSC.).
5:4 Reserved
3 TXC
Write 1 to clear the TXC interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags (This
feature must be enabled globally in MSC.).
2 ADDR
Write 1 to clear the ADDR interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
1 RSTART
Write 1 to clear the RSTART interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
0 START
Write 1 to clear the START interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
silabs.com | Building a more connected world.
Reset Access Description
0 (R)W1 Clear MSTOP Interrupt Flag
0 (R)W1 Clear NACK Interrupt Flag
0 (R)W1 Clear ACK Interrupt Flag
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0 (R)W1 Clear TXC Interrupt Flag
0 (R)W1 Clear ADDR Interrupt Flag
0 (R)W1 Clear RSTART Interrupt Flag
0 (R)W1 Clear START Interrupt Flag
Reference Manual
I2C - Inter-Integrated Circuit Interface
1.2 Conven-
Rev. 1.1 | 520