Rtcc_If - Rtcc Interrupt Flags - Silicon Laboratories EFR32xG14 Wireless Gecko Reference Manual

13.5.7 RTCC_IF - RTCC Interrupt Flags

Offset
0x018
Reset
Access
Name
Bit Name
31:11 Reserved
10 MONTHTICK
Set each time the month counter increments.
9 DAYOWOF
Set each time the day of week counter overflows.
8 DAYTICK
Set each time the day counter increments.
7 HOURTICK
Set each time the hour counter increments.
6 MINTICK
Set each time the minute counter increments.
5 CNTTICK
Set each time the main counter is updated.
4 OSCFAIL
Set when an oscillator failure has been detected.
3 CC2
Set when a channel 2 event has occurred.
2 CC1
Set when a channel 1 event has occurred.
1 CC0
Set when a channel 0 event has occurred.
0 OF
Set when a RTCC overflow has occurred.
silabs.com | Building a more connected world.
Reset Access Description
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0 R Month Tick
0 R Day of Week Overflow
0 R Day Tick
0 R Hour Tick
0 R Minute Tick
0 R Main Counter Tick
0 R Oscillator Failure Interrupt Flag
0 R Channel 2 Interrupt Flag
0 R Channel 1 Interrupt Flag
0 R Channel 0 Interrupt Flag
0 R Overflow Interrupt Flag
RTCC - Real Time Counter and Calendar
Bit Position
Reference Manual
1.2 Conven-
Rev. 1.1 | 393