Lesense_If - Interrupt Flag Register - Silicon Laboratories EFR32xG14 Wireless Gecko Reference Manual

28.5.19 LESENSE_IF - Interrupt Flag Register

Offset
0x050
Reset
Access
Name
Bit Name
31:23 Reserved
22 CNTOF
Set when the LESENSE counter overflows.
21 BUFOF
Set when the result buffer overflows
20 BUFLEVEL
Set when the data buffer is full.
19 BUFDATAV
Set when data is available in the result buffer.
18 DECERR
Set when the decoder detects an error
17 DEC
Set when the decoder has issued an interrupt request
16 SCANCOMPLETE
Set when a scan sequence is completed
15 CH15
Set when channel 15 triggers
14 CH14
Set when channel 14 triggers
13 CH13
Set when channel 13 triggers
12 CH12
Set when channel 12 triggers
11 CH11
Set when channel 11 triggers
10 CH10
Set when channel 10 triggers
silabs.com | Building a more connected world.
Reset Access Description
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0 R CNTOF Interrupt Flag
0 R BUFOF Interrupt Flag
0 R BUFLEVEL Interrupt Flag
0 R BUFDATAV Interrupt Flag
0 R DECERR Interrupt Flag
0 R DEC Interrupt Flag
0 R SCANCOMPLETE Interrupt Flag
0 R CH15 Interrupt Flag
0 R CH14 Interrupt Flag
0 R CH13 Interrupt Flag
0 R CH12 Interrupt Flag
0 R CH11 Interrupt Flag
0 R CH10 Interrupt Flag
LESENSE - Low Energy Sensor Interface
Bit Position
Reference Manual
1.2 Conven-
Rev. 1.1 | 980