Gpcrc_Cmd - Command Register - Silicon Laboratories EFR32xG14 Wireless Gecko Reference Manual

Bit Name
3:1 Reserved
0 EN
Enables CRC functionality.
Value
0
1

29.5.2 GPCRC_CMD - Command Register

Offset
0x004
Reset
Access
Name
Bit Name
31:1 Reserved
0 INIT
Writing 1 to this bit initialize the CRC by writing the INIT value in CRC_INIT to CRC_DATA.
29.5.3 GPCRC_INIT - CRC Init Value
Offset
0x008
Reset
Access
Name
Bit Name
31:0 INIT
This value is loaded into CRC_DATA upon issuing the INIT command in CRC_CMD
silabs.com | Building a more connected world.
Reset Access Description
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0 RW CRC Functionality Enable
Mode Description
DISABLE Disable CRC function. Reordering function is available, only BITRE-
VERSE and BYTEREVERSE bits are configurable in this mode
ENABLE Writes to inputdata registers result in CRC operations
Reset Access Description
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0 W1 Initialization Enable
Reset Access Description
0x00000000 RWH CRC Initialization Value
GPCRC - General Purpose Cyclic Redundancy Check
Bit Position
Bit Position
Reference Manual
1.2 Conven-
1.2 Conven-
Rev. 1.1 | 1006