Adcn_Cmd - Command Register - Silicon Laboratories EFR32xG14 Wireless Gecko Reference Manual

26.5.2 ADCn_CMD - Command Register

Offset
0x008
Reset
Access
Name
Bit Name
31:4 Reserved
3 SCANSTOP
Write a 1 to stop scan sequence.
2 SCANSTART
Write a 1 to start scan sequence.
1 SINGLESTOP
Write a 1 to stop single channel conversions.
0 SINGLESTART
Write to 1 to start converting in single channel mode.
silabs.com | Building a more connected world.
Reset Access Description
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0 W1 Scan Sequence Stop
0 W1 Scan Sequence Start
0 W1 Single Channel Conversion Stop
0 W1 Single Channel Conversion Start
Bit Position
Reference Manual
ADC - Analog to Digital Converter
1.2 Conven-
Rev. 1.1 | 875