Letimern_Ifc - Interrupt Flag Clear Register - Silicon Laboratories EFR32xG14 Wireless Gecko Reference Manual

21.5.11 LETIMERn_IFC - Interrupt Flag Clear Register

Offset
0x028
Reset
Access
Name
Bit Name
31:5 Reserved
4 REP1
Write 1 to clear the REP1 interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
3 REP0
Write 1 to clear the REP0 interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
2 UF
Write 1 to clear the UF interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags (This
feature must be enabled globally in MSC.).
1 COMP1
Write 1 to clear the COMP1 interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
0 COMP0
Write 1 to clear the COMP0 interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
silabs.com | Building a more connected world.
Reset Access Description
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0 (R)W1 Clear REP1 Interrupt Flag
0 (R)W1 Clear REP0 Interrupt Flag
0 (R)W1 Clear UF Interrupt Flag
0 (R)W1 Clear COMP1 Interrupt Flag
0 (R)W1 Clear COMP0 Interrupt Flag
Bit Position
Reference Manual
LETIMER - Low Energy Timer
1.2 Conven-
Rev. 1.1 | 736