Ldma_Ifc - Interrupt Flag Clear Register; Ldma_Ien - Interrupt Enable Register - Silicon Laboratories EFR32xG14 Wireless Gecko Reference Manual

8.6.15 LDMA_IFC - Interrupt Flag Clear Register

Offset
0x068
Reset
Access
Name
Bit Name
31 ERROR
Write 1 to clear the ERROR interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
30:8 Reserved
7:0 DONE
Write 1 to clear the DONE interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).

8.6.16 LDMA_IEN - Interrupt Enable Register

Offset
0x06C
Reset
Access
Name
Bit Name
31 ERROR
Enable/disable the ERROR interrupt
30:8 Reserved
7:0 DONE
Enable/disable the DONE interrupt
silabs.com | Building a more connected world.
Reset Access Description
0 (R)W1 Clear ERROR Interrupt Flag
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0x00 (R)W1 Clear DONE Interrupt Flag
Reset Access Description
0 RW ERROR Interrupt Enable
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0x00 RW DONE Interrupt Enable
Bit Position
Bit Position
Reference Manual
LDMA - Linked DMA Controller
1.2 Conven-
1.2 Conven-
Rev. 1.1 | 188