Silicon Laboratories EFR32xG14 Wireless Gecko Reference Manual page 239

Bit Name
3 EM01LD
Reserved for internal use. Do not change.
2 EM2BODDIS
This bit is used to disable BODs to minimize current in EM2. Reset with POR or Hard Pin Reset
1 EM2BLOCK
This bit is used to prevent the MCU from entering Energy Mode 2 or 3.
0 Reserved
silabs.com | Building a more connected world.
Reset Access Description
0 RW Reserved for internal use. Do not change.
0 RW Disable BOD in EM2
0 RW Energy Mode 2 Block
To ensure compatibility with future devices, always write bits to 0. More information in
tions
Reference Manual
EMU - Energy Management Unit
1.2 Conven-
Rev. 1.1 | 239