Timern_Ifc - Interrupt Flag Clear Register - Silicon Laboratories EFR32xG14 Wireless Gecko Reference Manual

20.5.6 TIMERn_IFC - Interrupt Flag Clear Register

Offset
0x014
Reset
Access
Name
Bit Name
31:12 Reserved
11 ICBOF3
Write 1 to clear the ICBOF3 interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
10 ICBOF2
Write 1 to clear the ICBOF2 interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
9 ICBOF1
Write 1 to clear the ICBOF1 interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
8 ICBOF0
Write 1 to clear the ICBOF0 interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
7 CC3
Write 1 to clear the CC3 interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags (This
feature must be enabled globally in MSC.).
6 CC2
Write 1 to clear the CC2 interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags (This
feature must be enabled globally in MSC.).
5 CC1
Write 1 to clear the CC1 interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags (This
feature must be enabled globally in MSC.).
4 CC0
Write 1 to clear the CC0 interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags (This
feature must be enabled globally in MSC.).
3 Reserved
2 DIRCHG
Write 1 to clear the DIRCHG interrupt flag. Reading returns the value of the IF and clears the corresponding interrupt flags
(This feature must be enabled globally in MSC.).
silabs.com | Building a more connected world.
Reset Access Description
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0 (R)W1 Clear ICBOF3 Interrupt Flag
0 (R)W1 Clear ICBOF2 Interrupt Flag
0 (R)W1 Clear ICBOF1 Interrupt Flag
0 (R)W1 Clear ICBOF0 Interrupt Flag
0 (R)W1 Clear CC3 Interrupt Flag
0 (R)W1 Clear CC2 Interrupt Flag
0 (R)W1 Clear CC1 Interrupt Flag
0 (R)W1 Clear CC0 Interrupt Flag
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0 (R)W1 Clear DIRCHG Interrupt Flag
Bit Position
Reference Manual
TIMER/WTIMER - Timer/Counter
1.2 Conven-
1.2 Conven-
Rev. 1.1 | 684