Aap_Crccmd - Crc Command Register; Aap_Crcstatus - Crc Status Register - Silicon Laboratories EFR32xG14 Wireless Gecko Reference Manual

6.5.5 AAP_CRCCMD - CRC Command Register

Offset
0x010
Reset
Access
Name
Bit Name
31:1 Reserved
0 CRCREQ
A CRC request is generated when set to 1. This command is not available if debug access or AAP is locked.

6.5.6 AAP_CRCSTATUS - CRC Status Register

Offset
0x014
Reset
Access
Name
Bit Name
31:1 Reserved
0 CRCBUSY
Set when the CRC calculation is executing. Will transition from 1 to 0 on valid data.
silabs.com | Building a more connected world.
Reset Access Description
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0 W1 CRC Request
Reset Access Description
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0 R CRC Calculation is Busy
Bit Position
Bit Position
Reference Manual
DBG - Debug Interface
1.2 Conven-
1.2 Conven-
Rev. 1.1 | 122