Ldma_If - Interrupt Flag Register; Ldma_Ifs - Interrupt Flag Set Register - Silicon Laboratories EFR32xG14 Wireless Gecko Reference Manual

8.6.13 LDMA_IF - Interrupt Flag Register

Offset
0x060
Reset
Access
Name
Bit Name
31 ERROR
The ERRORIF flag is set when a read or write error occurs. The CHERROR field in the LDMA_STATUS register reflects the
number of the channel which had the last error.
30:8 Reserved
7:0 DONE
When a channel completes a transfer or sync operation, the corresponding DONE bit is set in the LDMA_IF register.

8.6.14 LDMA_IFS - Interrupt Flag Set Register

Offset
0x064
Reset
Access
Name
Bit Name
31 ERROR
Write 1 to set the ERROR interrupt flag
30:8 Reserved
7:0 DONE
Write 1 to set the DONE interrupt flag
silabs.com | Building a more connected world.
Reset Access Description
0 R Transfer Error Interrupt Flag
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0x00 R DMA Structure Operation Done Interrupt Flag
Reset Access Description
0 W1 Set ERROR Interrupt Flag
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0x00 W1 Set DONE Interrupt Flag
Bit Position
Bit Position
Reference Manual
LDMA - Linked DMA Controller
1.2 Conven-
1.2 Conven-
Rev. 1.1 | 187