Lesense_Status - Status Register (Async Reg) - Silicon Laboratories EFR32xG14 Wireless Gecko Reference Manual

28.5.11 LESENSE_STATUS - Status Register (Async Reg)

For more information about asynchronous registers see
Offset
0x028
Reset
Access
Name
Bit Name
31:6 Reserved
5 DACACTIVE
LESENSE is currently using the VDAC.
4 SCANACTIVE
LESENSE is currently interfacing to sensors.
3 RUNNING
LESENSE is running in periodic mode.
2 BUFFULL
Set when the result buffer is full
1 BUFHALFFULL
Set when the result buffer is half full
0 BUFDATAV
Set when data is available in the result buffer. Cleared when the buffer is empty.
silabs.com | Building a more connected world.
4.3 Access to Low Energy Peripherals (Asynchronous
Reset Access Description
To ensure compatibility with future devices, always write bits to 0. More information in
tions
0 R LESENSE VDAC Interface is Active
0 R LESENSE Scan Active
0 R LESENSE Periodic Counter Running
0 R Result Buffer Full
0 R Result Buffer Half Full
0 R Result Data Valid
LESENSE - Low Energy Sensor Interface
Bit Position
Reference Manual
Registers).
1.2 Conven-
Rev. 1.1 | 969