Version
8.2.1.0
7.4.1.0
Usage Information When you enable VLAN-Stacking, no protocol packets are tunneled.
Related Command
show protocol-tunnel
protocol-tunnel enable
Enable protocol tunneling globally on the system.
C9000 Series
Syntax
protocol-tunnel enable
To disable protocol tunneling, use the no protocol-tunnel enable command.
Defaults
Disabled.
Command Modes
CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.4.1.0
Usage Information The system must have the default CAM profile with the default microcode before you
enable L2PT.
Description
Introduced on the C-Series, and S-Series.
Introduced
— displays tunneling information for all VLANs.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced
Service Provider Bridging
2020