005-197 Prohibit Combine Size Jam Rap - Xerox WorkCentre 5222 Service Manual

005-197 Prohibit Combine Size JAM RAP

A prohibited size combination was detected.
Initial Actions
• Refer to BSD 5.1.
Procedure
Execute Component Control[005-221]. Actuate the DADF Tray Size 1 Sensor with paper. The
display changes.
Y N
Check the connections of P/J771 and P/J759.
rectly.
Y N
Connect P/J771 and P/J759.
Check the wire between J771 and J759 for an open circuit or a short circuit (BSD 5.1
1/Flag 2). The wire between J771 and J759 is conducting without an open circuit or
a short circuit.
Y N
Repair the open circuit or short circuit.
Measure the voltage between the DADF PWB P759-3 (+) and GND (-) (BSD 5.1
The voltage is approx. +5VDC.
Y N
Replace the DADF PWB (PL 15.3).
Measure the voltage between the DADF PWB P759-2 (+) and GND (-) (BSD 5.1
Actuate the DADF Tray Size 1 Sensor with paper. The voltage changes.
Y N
Replace the DADF Tray Size 1 Sensor
Replace the DADF PWB (PL 15.3).
Execute Component Control[005-222]. Actuate the DADF Tray Size 2 Sensor with paper. The
display changes.
Y N
Check the connections of P/J772 and P/J759.
rectly.
Y N
Connect P/J772 and P/J759.
Check the wire between J772 and J759 for an open circuit or a short circuit (BSD 5.1
3/Flag 4). The wire between J772 and J759 is conducting without an open circuit or
a short circuit.
Y N
Repair the open circuit or short circuit.
Measure the voltage between the DADF PWB P759-6 (+) and GND (-) (BSD 5.1
The voltage is approx. +5VDC.
Y N
Replace the DADF PWB (PL 15.3).
A B
Status Indicator Raps
005-197
P/J771 and P/J759 are connected cor-
Flag
Flag
Flag
(PL 15.10).
P/J772 and P/J759 are connected cor-
Flag
Flag
February, 2008
A B
Measure the voltage between the DADF PWB P759-5 (+) and GND (-) (BSD 5.1
Actuate the DADF Tray Size 2 Sensor with paper. The voltage changes.
Y N
Replace the DADF Tray Size 2 Sensor
Replace the DADF PWB (PL
Replace the DADF PWB (PL 15.3).
2).
1).
4).
2-70
(PL 15.10).
15.3).
WorkCentre 5225, 5230
Flag 3).
Launch Version