Show Ip Bgp Paths - Dell Force10 S4810P Reference Manual

show ip bgp paths

View all the BGP path attributes in the BGP database.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip bgp paths [regexp regular-expression]
Parameters
regexp
expression
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Usage
The following describes the show ip bgp path command shown in the Example below.
Information
Field
Total
Address
Hash
regular-
Enter a regular expression then use one or a combination of the
following characters to match:
•
•
•
•
•
•
•
•
•
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Description
Displays the total number of BGP path attributes.
Displays the internal address where the path attribute is stored.
Displays the hash bucket where the path attribute is stored.
. = (period) any single character (including a white space).
* = (asterisk) the sequences in a pattern (0 or more
sequences).
+ = (plus) the sequences in a pattern (1 or more sequences).
? = (question mark) sequences in a pattern (either 0 or 1
sequences).
NOTE: You must enter an escape sequence (CTRL+v) prior
to entering the ? regular expression.
[ ] = (brackets) a range of single-character patterns.
( ) = (parenthesis) groups a series of pattern elements to a
single element.
{ } = (braces) minimum and the maximum match count.
^ = (caret) the beginning of the input string. If you use the
caret at the beginning of a sequence or range, it matches on
everything BUT the characters specified.
$ = (dollar sign) the end of the output string.
429