Acl Overview - Dell PowerConnect 54 Series User Manual

The following table summarizes the equivalent CLI commands for configuring Locked Port security as
displayed in the Port Security page.
Table 7-4. Port Security CLI Commands
CLI Command
shutdown
set interface active {ethernet
interface | port-channel port-
channel-number}
port security [forward |
discard | discard-shutdown]
[trap seconds]
show ports security
{ethernet interface | port-
channel port-channel-
number}
The following is an example of the CLI commands:
Console # show ports security
Port Status
----- -------
g7 Unlocked
g8 Unlocked
g3 Unlocked

ACL Overview

Access Control Lists (ACL) allow network managers to define classification actions and rules for specific
ingress ports. Packets entering an ingress port, with an active ACL, are either admitted or denied entry and
the ingress port is disabled. If they are denied entry, the user can disable the port.
Defining IP based ACLs
Access Control Lists (ACL), which are comprised of Access Control Entries (ACE), allow network
managers to define classification actions and rules for specific ingress ports. Packets entering an ingress
port, with an active ACL, are either admitted or denied entry and the ingress port is disabled. If they are
denied entry, the user can disable the port.
Description
Disables interfaces.
Reactivates an interface that is shutdown due to
port security reasons.
Locks learning of new addresses on an interface.
Displays port lock status.
Action
-------
Discard
Discard,
Shutdown
-
Trap Frequency
------- ---------
Enable 100
Disable
- -
Configuring Device Information
Counter
--------
88
-
227