Network Port Connector Pinout Information for an EX2200 Switch
Table 44: Network Port Connector Pinout Information for EX2200 Switches
Pin
1
2
3
4
5
6
7
8
Related
Documentation
RJ-45 to DB-9 Serial Port Adapter Pinout Information for a Switch
Copyright © 2016, Juniper Networks, Inc.
A network port on an EX2200 switch uses an RJ-45 connector to connect to a device.
The port uses an autosensing RJ-45 connector to support a 10/100/1000Base-T
connection. Two LEDs on the port indicate link/activity on the port and the port status.
See
"Network Port and Uplink Port LEDs in EX2200 Switches" on page
Table 44 on page 109
provides the pinout information for the RJ-45 connector. An RJ-45
cable, with a connector attached, is supplied with the switch.
Signal
TRP1+
TRP1-
TRP2+
TRP3+
TRP3-
TRP2-
TRP4+
TRP4-
EX2200 Switches Hardware Overview on page 3
The console port is an RS-232 serial interface that uses an RJ-45 connector to connect
to a management device such as a PC or a laptop. If your laptop or PC does not have a
DB-9 male connector pin and you want to connect your laptop or PC to the switch, use
a combination of the RJ-45 to DB-9 female adapter supplied with the switch along with
a USB to DB-9 male adapter.
Table 45 on page 110
provides the pinout information for the RJ-45 to DB-9 serial port
adapter.
Chapter 9: Pinout Specifications
16.
Description
Transmit/receive data pair 1
Negative Vport (in PoE models)
Transmit/receive data pair 1
Negative Vport (in PoE models)
Transmit/receive data pair 2
Positive Vport (in PoE models)
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Positive Vport (in PoE models)
Transmit/receive data pair 4
Transmit/receive data pair 4
109