Rep 1.13 Transfer Roll - Xerox Phaser 3020 Service Manual

REP 1.13 Transfer Roll

Parts List on PL 3.1
Removal
1. Switch Off the Printer and unplug the Power Cord.
2. Remove the Print Cartridge.
3. Remove the Fuser Module (REP 1.14).
4. From the rear of the printer, using a small screwdriver release the latches (2) and push
the Transfer Roll Bushing into the printer
Figure 1 Transfer Roll Bushing Latches (Rear View)
Xerox® Phaser® 3020 Printer Service Manual
(Figure 1).
Latches
5. Lift the Transfer Roll out of the printer
Figure 2 Transfer Roll Removal (Top View)
June 2014
4-19
(Figure 2).
Transfer Roll
REP 1.13
Repairs