Rep 11.7 No Paper Actuator; Rep 11.8 Turn Roll Assembly - Xerox DocuPrint N2125 Service Manual

REP 11.7 No Paper Actuator

Parts List on PL 11.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the printer from the 550 Sheet Feeder
2. Remove the Tray from the Feeder.
3. Remove the 550 Sheet Feeder Right Cover
4. Remove the 550 Sheet Feeder Left Cover
5. Remove 550 Sheet Gear Bracket Assembly
6. Remove the Top Plate (REP 11.5).
7. Remove the 550 Sheet Feeder Drive Assembly
8. Rotate the No Paper Actuator up until the left end of the actuator can be removed from the
support (Figure 1). Remove the Actuator.
Figure 1 No Paper Actuator
Replacement
1. Reinstall the components in the reverse order.
Repair-Adjustment
REP 11.7, REP 11.8
WARNING
(REP 11.1).
(REP 11.2).
(REP 11.3).
(REP 11.4).
(REP 11.6).

REP 11.8 Turn Roll Assembly

Parts List on PL 11.2
Removal
Switch off the power and disconnect the Power Cord.
1. Remove the printer from the 550 Sheet Feeder
2. Remove the Tray from the Feeder.
3. Remove the 550 Sheet Feeder Right Cover
4. Remove the 550 Sheet Feeder Left Cover
5. Remove 550 Sheet Feeder Gear Bracket Assembly
6. Remove the Top Plate (REP
7. Remove the 550 Sheet Paper Feeder Drive Assembly
8. Remove the No Paper Actuator
9. Disconnect P/J64 on the Paper Feeder PWB
10. Remove the four screws that secure the Turn Roll Assembly to the Feeder Assembly
ure 1).
11. Remove the Turn Roll Assembly together with the Extension Springs and Chute Spring
(Figure 1).
12. Unhook the left and right Extension Springs from the two notches
13. Remove the Chute Spring (Figure
Figure 1 Turn Roll Assembly
02/2000
4-82
WARNING
(REP 11.1).
(REP 11.2).
(REP 11.3).
(REP 11.4).
11.5).
(REP 11.6).
(REP 11.7).
(Figure 1).
(Figure
2).
(Fig-
3).
Initial Issue
DocuPrint N2125