Metric-Style Narrow - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

metric-style narrow

[ no ] metric-style narrow [ transition ] [ level-1 | level-2 | level-1-2 ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the router to generate and accept only old-style IS-IS TLVs with narrow
Description
(six-bit) metric fields. If you issue this command, the value configured with the isis
metric command can range only from 0–63. The no version restores the default
value, which is to generate and accept only old-style TLVs with narrow (six-bit) metric
fields.
Options
Router Configuration
Mode
transition Configures the router to additionally accept new-style TLVs with
wider metric fields
level-1 Configuration applies only to level 1 routing
level-2 Configuration applies only to level 2 routing
level-1-2 Configuration applies to both level 1 and level 2 routing
Chapter 13: M Commands
1299
metric-style narrow