Direct Outward Dialling (Dod) - NEC NEAX 2000 Programming Manual

DIRECT OUTWARD DIALLING (DOD)

PROGRAMMING
START
CM10 Assign the trunk numbers to required LEN.
Assign the data for Direct Outward Dialing
CM30
to the trunk number assigned by CM10.
For Resident System Program,
NOTE:
refer to the Command Manual.
Assign the data for Direct Outward Dialing
CM35
to the Route number assigned by CM30
Y=00.
For Resident System Program,
NOTE:
refer to the Command Manual.
A
DESCRIPTION
DIRECT OUTWARD DIALLING (DOD)
(1) 000-763: LEN
(2) D000-D255: Trunk No.
Y=00 Trunk Route allocation
•
(1) 000-255: Trunk No.
(2) 00-63: Trunk Route No.
Y=01 Tenant Allocation
•
(1) 000-255: Trunk No.
(2) 00-63: Tenant No.
01 : Tenant No.
Y=08 Restriction on Night Mode
•
(1) 000-255: Trunk No.
(2) 0 : Restricted
1 : Allow
Y=00 Kind of Route
•
(1) 00-63: Trunk Route No.
(2) 00: C.O.Line
Y=01 Type of Signal
•
(1) 00-63: Trunk Route No.
(2) 2 : DP (10 PPS)
3 : DP (20 PPS)
4 : DTMF
7 : DTMF
Y=02 OG/IC
•
(1) 00-63: Trunk Route No.
(2) 2 : Outgoing
3 : Bothway
– 227 –
DATA
NOTE
A2222-10