NEC NEAX 2000 Programming Manual page 627

A
Assign the number of received digits of
CM31
station number from PSTN.
If no data is assigned, the MFC
NOTE:
Signaling can not be provided.
Assign the MFC Sender and Receiver to
each circuit.
NOTE: The first data (AP number 0-3)
corresponds to the AP numbers
(X, Y, Z, W: 04-15, 20-31) as-
signed by CM05, as shown be-
low.
CM31 Y=2
AP number 0: AP number X
AP number 1: AP number Y
AP number 2: AP number Z
AP number 3: AP number W
(X<Y<Z<W)
END
DESCRIPTION
INITIAL
INITIAL
CM05 Y=0
FEATURES FOR OTHER COUNTRIES ONLY
MFC-INCOMING CALL/MFC-OUTGOING CALL
Y=1
•
(1) 2: Number of received digits of station
number from PSTN
(2) 01-31: 1 digit-31 digits
Y=2
•
(1) 0-3: AP No.
(2) 0 : All circuit are assigned as Sender
1 : Circuit No. 0, 1: Sender
Circuit No. 2, 3: Receiver
2 : Circuit No. 0, 1: Receiver
Circuit No. 2, 3: Sender
3 : All circuits are assigned as Receiv-
er
– 607 –
DATA
A2594-10