Announcement Service - NEC NEAX 2000 Programming Manual

ANNOUNCEMENT SERVICE

PROGRAMMING
To access the Digital Announcement Trunk from a station or C.O./Tie Line party:
START
CM08
Specify the Multiple Connections of the
Digital Announcement Trunk (DAT card)
on Announcement Service.
Assign a Digital Announcement Trunk card
CM10
number to the required LEN.
The Digital Announcement Trunk
NOTE:
card number must be assigned
to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4) and the seventh LEN
(Level 6) of each LT slot.
Assign the Service Restriction Class A for
CM12
Announcement Service to the required
stations.
A
DESCRIPTION
(1) 124
(2) 0 : Available
1 : Not available (Single Connection)
(1) 000-763: LEN
(2) EB002-EB127: Digital Announcement
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE:
Y=02
•
(1) X-XXXXXXXX: My Line No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class
– 21 –
ANNOUNCEMENT SERVICE
DATA
Trunk Card No.
EB000 and EB001 are dedi-
cated to built-in Digital An-
nouncement Trunk of the MP
card.
A
A2018-10