NEC NEAX 2000 Programming Manual page 853

CALL FORWARDING - BUSY LINE (CONT'D)
SERVICE CONDITIONS (CONT'D)
6. CALL FORWARDING on a system basis allows any trunk incoming calls which encounter a busy con-
dition to be forwarded to a predetermined station or Attendant Console.
7. Individual CALL FORWARDING - BUSY LINE settings take precedence over system-basis CALL
FORWARDING - BUSY LINE settings.
8. If all the stations in the terminating Hunt Group are busy, the forwarding call will hear Busy Tone and
will not return to the calling party's Hunt Group.
9. If the called station is the pilot of a UCD group and activates Call Forwarding - Busy Line, the calling
station will queue to the UCD group and will not forward.
10. If a calling station or Attendant Console receives Busy Tone after being CALL FORWARDED - BUSY
LINE, the caller can activate EXECUTIVE RIGHT OF WAY, CALL WAITING - ORIGINATING,
CALL WAITING - TERMINATING, ATTENDANT OVERRIDE, BUSY VERIFICATION, CALL
BACK, or other services available on busy tone to the initially called station.
11. There is no limitation to the number of stations which can set CALL FORWARDING - BUSY LINE
simultaneously.
12. The operator answering a CALL FORWARDING call can identify the called station number on the
Attendant Console display.
13. CALL FORWARDING -DON'T ANSWER can be set simultaneously with this feature to result in
CALL FORWARDING - BUSY LINE/DON'T ANSWER. CALL FORWARDING - BUSY LINE and
CALL FORWARDING - DON'T ANSWER can be set to the same or different extensions.
ND-91285-001(E)
DECEMBER, 1999
(2/2)
Page 71
Revision 1.0