Toll Denial/Toll Diversion - NEC NEAX 2000 Programming Manual

TOLL DENIAL/TOLL DIVERSION

PROGRAMMING
In addition to the system data programming of TOLL RESTRICTION-3/6-DIGIT
do the following programming.
START
Provide the system with the Toll Diversion
CM08
or the Toll Denial.
CM12 Assign a Trunk Restriction Class to each
station.
CM35
Specify the route access capability of each
Restriction Class.
See "RESTRICTION FROM OUTGOING
CALLS".
END
DESCRIPTION
page 414
TOLL DENIAL/TOLL DIVERSION
(1) 119
(2) 0 : Toll Diversion (Routed to "ICPT"
key on ATTCON.)
1 : Toll Denial
(Routed to Reorder Tone)
Y=01
•
(1) X-XXXXXXXX: Station No.
(2) X Z: Trunk Restriction Class
X: 1-8: In Day Mode
Z: 1-8: In Night Mode
Y=51-58
•
(1) 00-63: Trunk Route No.
(2) 0 : Restricted
1 : Allow
– 523 –
page 527
DATA
A2523-10
,