NEC NEAX 2000 Programming Manual page 965

GENERAL DESCRIPTION
This feature allows selected stations to reach the Attendant simply by going off-hook.
STATION APPLICATION
All stations
OPERATING PROCEDURE
To reach the Attendant:
1. HOUSE PHONE user lifts handset.
2. Attendant is called automatically.
3. Attendant answers.
4. Attendant connects user to desired station or trunk.
SERVICE CONDITIONS
1. Attendant Console indications will appear as follows:
a. ATND key Lamps flash.
b. Console buzzer sounds.
2. The telephone set used with this feature may be equipped with or without dials.
3. HOUSE PHONE assignments are programmed into system data via the MAINTENANCE ADMINIS-
TRATION TERMINAL (MAT) and CUSTOMER ADMINISTRATION TERMINAL (CAT).
4. There is no limit to the number of HOUSE PHONEs permitted in the system.
5. It can be assigned Single Line Telephone or D
HOUSE PHONE
term
for destination of HOUSE PHONE.
ND-91285-001(E)
DECEMBER, 1999
(1/1)
Page 183
Revision 1.0