Call Back Call Back-Don't Answer Call Back-D; Call Back-D Term - NEC NEAX 2000 Programming Manual

CALL BACK
CALL BACK-DON'T ANSWER
CALL BACK-D
PROGRAMMING
START
Provide the system with the Single Digit
CM08
Feature Access Code while calling the sta-
tion hears ringback tone/busy tone.
To activate the Single Digit Feature Ac-
cess Code, set the data for CM08>050,
051, 069 and 148 to "1".
A single digit access code "2" is fixedly assigned to this feature.
NOTE 1:
While the calling D
NOTE 2:
digit access code "2" is not available.
NOTE 3: From a DTMF telephone a hooking operation is required before dialing the single
digit access code.
CM12 Assign Service Restriction Class A to the
necessary stations.
A
term
DESCRIPTION
term
, DP or DTMF telephone is holding the other call, the single
(1) 156: Ringback Tone
(2) 0: Available
(1) 208: Busy Tone
(2) 0: Available
(1) 050: * Button as Switch Hook Flash
(2) 1 : Ineffective
(1) 051: # Button as Switch Hook Flash
(2) 1 : Ineffective
(1) 069: Single Digit Dialing on BT Con-
nection
(2) 1 : Step Call
(1) 148: Same Last Digit Redialing on BT
Connection
(2) 1 : Ineffective
Y=02
•
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class
– 80 –
CALL BACK
CALL BACK-DON'T ANSWER
CALL BACK-D
DATA
A
term
A2076-10