Incoming Central Office Call To Tie Line Connection - NEC NEAX 2000 Programming Manual

INCOMING CENTRAL OFFICE CALL TO TIE LINE CONNEC-
TION
PROGRAMMING
START
CM30
Assign route number to C.O. trunks and
Tie Line trunks.
Assign the terminating system of the C.O.
trunks to ATTCON/DESKCON.
CM35
Assign the route data to C.O. trunks and
Tie Line trunks.
A

INCOMING CENTRAL OFFICE CALL TO TIE LINE CONNECTION

DESCRIPTION
Y=00
•
(1) 000-255: Trunk No.
(2) 00-63: Trunk Route No.
Y=02 In Day Mode
•
Y=03 In Night Mode
•
Y=40 In Mode A
•
Y=41 In Mode B
•
(1) 000-255: Trunk No.
(2) 14: Termination to Attendant Console
Y=00 Kind of trunk route
•
(1) 00-63: Trunk Route No.
(2) 00: C.O. Line
04: Tie Line
Y=02 IC/OG
•
(1) 00-63: Trunk Route No.
(2) 1 : Incoming trunk
2 : Outgoing trunk
3 : Bothway trunk
Set 1 or 3 to C.O. Line, and 2 or 3 to Tie
Line.
Y=04 Answer Signal on Tie Line
•
(1) 00-63: Trunk Route No. of Tie Line
(2) 2: Answer Signal arrives from distant
office
Y=05 Release Signal
•
(1) 00-63: Trunk Route No.
(2) 0 : No Release Signal
1 : Release Signal arrives from dis-
tant office
Set 1 to Tie Line, and 0 or 1 to C.O. Line.
– 278 –
DATA
A2270-10