Automatic Recall; Automatic Recall-D - NEC NEAX 2000 Programming Manual

AUTOMATIC RECALL

AUTOMATIC RECALL-D

PROGRAMMING
START
Specify the timing for AUTOMATIC RE-
CM41
CALL.
If no data is set, the following timing will be
applied:
Attendant Recall
Non Exclusive Hold: 60-64 sec.
Exclusive Hold
Transfer Recall
Camp-On Recall
A
term
DESCRIPTION
: 31.2-33.6 sec.
: 236-240 sec.
: 24-28 sec.
: 24-32 sec.
Y=0
•
(1) 00: Attendant Recall
(2) 01-14: 2.4 sec.-33.6 sec.
(2.4 sec. increments)
15-24: 38.4 sec.-124.8 sec.
(9.6 sec. increments)
If no data is set, the default setting is 31.2-
33.6 sec.
(1) 05: Non Exclusive Hold
(2) 01-98: 4 sec.-392 sec.
(4 sec. increments)
99 : Recall is not performed
If no data is set, the default setting is 60-64
sec.
(1) 06: Exclusive Hold
(2) 01-98: 4 sec.-392 sec.
(4 sec. increments)
99 : Recall is not performed
If no data is set, the default setting is 236-
240 sec.
(1) 07: Transfer Recall
(2) 01-30: 4 sec.-120 sec.
(4 sec. increments)
If no data is set, the default setting is 24-28
sec.
– 68 –
AUTOMATIC RECALL
AUTOMATIC RECALL-D
DATA
term
A2066-10