Call Waiting-Station - NEC NEAX 2000 Programming Manual

CALL WAITING-STATION

PROGRAMMING
START
CM08
Provide the system with the Call Waiting
feature.
To activate the Single Digit Feature Ac-
cess Code, set the data for 050, 051, 069
and 148 to "1".
Provide the System with the Single Digit
Feature Access Code on BT Connection.
Specify the Camp-On (Call Waiting) Tone
sent to a busy station.
A
DESCRIPTION
(1) 146: Automatic Camp-On
(2) 0: Available
(1) 147: Manual Camp-On
(Result of Switch Hook Flash
while hearing Busy Tone)
(2) 0: Special Dial Tone allowing use of
Camp-On by Station access code
(1) 050: * Button as Switch Hook Flash
(2) 1 : Ineffective
(1) 051: # Button as Switch Hook Flash
(2) 1 : Ineffective
(1) 069: Single Digit Dialing on BT Con-
nection
(2) 1 : Step Call
(1) 148: Same Last Digit Redialing on BT
Connection
(2) 1 : Ineffective
(1) 208
(2) 0: Available
(1) 367
(2) For Australia/Other Countries:
0 : Every 4 sec.
1 : Only once
For New Zealand:
0 : Only once
1 : Every 2 min.
– 143 –
CALL WAITING-STATION
DATA
A2131-10