NEC NEAX 2000 Programming Manual page 150

When you clear the call records by the Audit Report (without printout) after confirming whether
the call records are printed out normally or not by the Interim Printout, do the following program-
ming. If the trouble such as printer paper jam, lack of paper occurs in the Audit Printout, the call
records can not be printed out again because the call records stored in the memory are automat-
ically cleared by the Audit Printout. To prevent this trouble, this programming is required.
START
Assign the data for displaying the totaled
CMD000
call charge of call records on station basis.
Assign the data for displaying the totaled
call charge of call records on group basis.
Assign the data for confirming the call
records which have been printed out by
the Interim Printout on station basis.
Assign the data for confirming the call
records which have been printed out by
the Interim Printout on group basis.
Assign the data for clearing only the call
records which have been printed out.
END
DESCRIPTION
CALL INFORMATION SYSTEM (CIS)
(1) 16
(2) 1: Available
(1) 128
(2) 1: Available
(1) 121
(2) 1: Available
(1) 122
(2) 1: Available
(1) 123
(2) 1: Available
– 130 –
PROGRAMMING
TIMS Printer Programming
DATA
A2107-10