Call Pickup-Designated Group - NEC NEAX 2000 Programming Manual

CALL PICKUP-DESIGNATED GROUP

PROGRAMMING
START
CM16 Assign each Call Pickup group, by assign-
ing station numbers within a group one by
one with the following operation:
1st Operation: (1) Station A (2) Station B
2nd Operation: (1) Station B (2) Station C
Last Operation: (1) Station X (2) Station A
Assign the Service Restriction Class A to
CM12
each station.
CM15 Allow Call Pickup-Direct in the Service Re-
striction Class A assigned by CM12 Y=02.
CM20 Assign an access code for Call Pickup-
Designated Group.
END
There is no limit to the amount of Call Pickup groups.
NOTE 1:
The maximum number of stations within a group is 60. Individual station can be as-
NOTE 2:
signed to only one Call Pickup Group.
DESCRIPTION
CALL PICKUP-DESIGNATED GROUP
Y=0
•
(1) X-XXXXXXXX: Station No. to be in-
(2) X-XXXXXXXX: Another station No. to
Y=02
•
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class
Y=14
•
(1) 00-15: Service Restriction Class A
(2) 1 : Allow
Y=0-3 Numbering Plan Group 0-3
•
(1) X-XXXX: Access Code
(2) A037: Call Pickup-Designated Group
– 134 –
DATA
cluded in the Call Pick-
up Group
be included in the same
Call Pickup Group
A
assigned by CM12 Y=02
A2131-10