NEC NEAX 2000 Programming Manual page 830

(1/1)
GENERAL DESCRIPTION
term
While a D is under idle state, the BACKGROUND MUSIC (BGM) is sent out from the built-in
term
speaker of the D preselected by the D
STATION APPLICATION
term
All D s
OPERATING PROCEDURE
To select BGM:
1. Press Speaker key.
2. Dial BGM feature access code.
3. Dial BGM No. (0-9).
4. Depress Speaker key.
To cancel BGM:
1. Press Speaker key.
2. Dial BGM feature access code.
3. Dial #.
4. Press Speaker key.
SERVICE CONDITIONS
1. One BGM can be selected out of 10 music programs. Only one per station can be selected at a time.
2. Effective/ineffective of this service feature is determined according to the Service Feature Class
assigned to each station.
3. Hardware requirements are as follows:
• COT or TNT card per BGM
• The BGM equipment is to be furnished by the customer. The input source is –10 to 0 dBm, 600
ohms (COT), or –8 dBm or less, 10 Kohms (TNT).
4. When a terminal goes off-hook, the music is automatically stopped. When the terminal goes on-hook,
the music starts again, until the feature is canceled.
5. The BGM equipment should be under ready state for starting at any time.
6. Incoming voice call, ringing and recalls override BGM.
Page 48
Revision 1.0
BACKGROUND MUSIC-D
term
user.
ND-91285-001(E)
DECEMBER, 1999
term